CPE Rubber Stainless Steel Braided Fuel Hose - PER M

Stainless Steel Braided Fuel Hose with CPE Rubber Inner Lining (Sold Per Meter)

Designed for motorsport and fast road use, the CPE is perhaps the most widely used range of lines and fittings. The CPE hose is a true double braided stainless hose that uses the highest quality stainless wire available.

It is produced by using a reinforced CPE synthetic rubber liner which is then wrapped in a double stainless steel external braid to give extra resistance to any abrasion.

When locating fuel or oil lines inside any vehicle cabin, we recommend using the PTFE hose & fittings range which is produced with PTFE inner lining.

Available in AN4, AN6, AN8, AN10, AN12 & AN16 Options

-40° to 150°C Temperature Operating Range

AN4 CPE Hose:

• ID – 5.4mm
• OD – 11.2mm
• Operating Pressure – 1000psi
• Burst Pressure – 6000psi

AN6 CPE Hose:

• ID – 8.7mm
• OD – 14.20mm
• Operating Pressure – 1000psi
• Burst Pressure – 6000psi

AN8 CPE Hose:

• ID – 11.10mm
• OD – 17.10mm
• Operating Pressure – 1000psi
• Burst Pressure – 5000psi

AN10 CPE Hose:

• ID – 14.20mm
• OD – 20.80mm
• Operating Pressure – 1000psi
• Burst Pressure – 5000psi

AN12 CPE Hose:

• ID – 17.40mm
• OD – 24.40mm
• Operating Pressure – 1000psi
• Burst Pressure – 3750psi

AN16 CPE HOSE:

• ID – 22.20 mm
• OD – 30.50 mm
• Operating Pressure – 750psi
• Burst Pressure – 2,500psi